CWA V2 WiFi Connecting and Kibana

Connecting to WiFi
The screen will display a message:
“To connect to WiFi connect to SSID: MaxIQ-
In this case, it is MaxIQ-22311028  

Open up your WiFi options on your laptop or mobile device, and look for a network “MaxIQ-“
In this case, it is MaxIQ-22311028

Select that network and wait for the configuration screen to pop up:

This could take many seconds, be patient

Enter the SSID (Local network name)
Enter the password for that SSID

Enter a unique Unit Name
Enter your Institution name
Save

The screen will close and:

• Your device will connect automatically to its original WiFi
• The WiFi credentials will display on the OLED screen
• These WiFi credentials are saved to the core, you do not need to reconnect every time you use your kit.
• Each time you power up your kit it will look for this WiFi connection, and if it doesn’t find it, the data will still be displayed on the screen yet not on the dashboard.

To change the WiFi credentials, repeat these steps.

Navigating to the Kibana Dashboard

Open your browser and navigate to data.maxiq.space:

Enter the Username “data” and password “maxiq”:

The first screen will be “Discover”, yet you will need to change the index to “maxiq”.

The system should default to “maxiq”:

By opening up one of the records, you will be able to see an example of a data packet:

Template Dashboard

On the left side, go to the “Dashboard” section, and in the search bar, look for “MK01 V2 Template Dashboard”:

For this module we will use “MK01 V2 Getting Started Guide”

In the search bar, add your kit name with the “*”:

If you wish to analyse the data collected, download the data from the Data Table, and open it in any spreadsheet tool.